CRS Series Flow Cool Jets are of rugged, high quality stainless
steel manufacture for long life and durability. These popular, industry standard plug-in cooling
components, are conveniently installed into single flow channels and provide water cooling
directly to the internal tip of the core pin. In a minimal cost series flow installation
only a single flow channel is required to provide cooling to several cores.
CRS Parallel Flow Cool Jets
CRS Parallel Flow Cool Jets are of the same rugged, high quality
stainless steel manufacture as the series flow Cool Jets but with a difference ...
they allow an easy and convenient installation of a parallel connection,
core cooling system. With large multi-cavity systems, great effort
and emphasis is expended in design and tool making to optimise the plastic
material flow. Balancing of hot runner systems involve sophisticated temperature
regulation to manage high operational performance requirements. In such
applications, it is also an essential requirement to also install a 'balanced
cooling system' to allow rapid cooling of all core pins and at an
equal rate of cooling. The cooling system assists the temperature regulation
rather than working against it.
Full details of CRS Series Flow and Parallel Flow Cool Jets
ranges are available from the CRS Plastics Tool Cooling Brochure,
the brochure
is available for download in PDF format from this web site or alternatively a printed copy may be sent
to you by post on request. Link to downloads page
